Oscam Sk*link

[callas]

Zdravim, chcem rozbehnut kartu skylink ice v oscame. Skusal som rozne binarky, manualna konfiguracia atd.
Ked prepnem na CT 1, tak dostavam tieto logy:

Kód: Vybrat vše

2017/03/26 16:15:39 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (70 ms)
2017/03/26 16:15:39 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:15:39 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (71 ms)
2017/03/26 16:15:39 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (69 ms)
2017/03/26 16:15:43 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:15:48 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (78 ms)
2017/03/26 16:15:48 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (100 ms)
2017/03/26 16:15:48 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:15:48 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:15:48 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (78 ms)
2017/03/26 16:15:49 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (77 ms)
2017/03/26 16:15:50 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:15:52 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:15:52 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (94 ms)
2017/03/26 16:15:56 32FDA832 r        (-) -- Skipped 3 duplicated log lines --
2017/03/26 16:15:56 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:15:58 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:15:58 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (94 ms)
2017/03/26 16:16:14 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (96 ms)
2017/03/26 16:16:14 1060BC63 c   (dvbapi) Demuxer 0 stop descrambling program number 1331 (FFFE@FFFFFE:1331 unknown)
2017/03/26 16:16:14 1060BC63 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 0668 ECM_PID: 1659 PROVID: 000000 
2017/03/26 16:16:14 1060BC63 c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 069A ECM_PID: 1663 PROVID: 000000 
2017/03/26 16:16:14 1060BC63 c   (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in caPMT
2017/03/26 16:16:14 1060BC63 c   (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2017/03/26 16:16:15 1060BC63 c   (dvbapi) Demuxer 0 found 2 ECMpids and 3 STREAMpids in PMT
2017/03/26 16:16:15 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (100 ms)
2017/03/26 16:16:15 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (78 ms)
2017/03/26 16:16:16 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/03/26 16:16:16 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (97 ms)
2017/03/26 16:16:17 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (96 ms)
2017/03/26 16:16:17 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:16:17 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (79 ms)
2017/03/26 16:16:17 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (77 ms)
2017/03/26 16:16:19 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (78 ms)
2017/03/26 16:16:19 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/03/26 16:16:19 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:16:20 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=55 (hex: 0x37), cnt=1: written (78 ms)
2017/03/26 16:16:21 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:16:24 1060BC63 c        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:16:24 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/03/26 16:16:24 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (94 ms)
2017/03/26 16:16:25 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:16:25 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (95 ms)
2017/03/26 16:16:28 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:16:28 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=72 (hex: 0x48), cnt=1: written (94 ms)
2017/03/26 16:16:28 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/03/26 16:16:29 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (71 ms)
2017/03/26 16:16:33 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/03/26 16:16:36 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (74 ms)
2017/03/26 16:16:36 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=shared, len=93 (hex: 0x5D), cnt=1: written (116 ms)
2017/03/26 16:16:37 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2017/03/26 16:16:38 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (72 ms)
2017/03/26 16:16:39 32FDA832 r        (-) -- Skipped 1 duplicated log lines --
2017/03/26 16:16:39 32FDA832 r   (reader) SKY_LINK [cryptoworks] Dreambox emmtype=global, len=48 (hex: 0x30), cnt=1: written (71 ms)
2017/03/26 16:16:40 1060BC63 c   (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Oscam som nastavil takto:

Kód: Vybrat vše

oscam.server 
[reader]
label                         = SKY_LINK
protocol                      = internal
device                        = /dev/sci0
caid                          = 0D96
detect                        = cd
mhz                           = 305
cardmhz                       = 305
group                         = 1
emmcache                      = 1,1,2

Kód: Vybrat vše

oscam.user
[account]
user                          = dvbapi
pwd                           =
group                         = 1
au                            = 1

Kód: Vybrat vše

scam.conf
[dvbapi]
enabled                       = 1
au                            = 1
user                          = dvbapi
boxtype                       = dreambox

Kód: Vybrat vše

oscam.dvbapi
]P: 0D96 1

[Thomik1]

To dvbapi by mělo vypadat takto.

Kód: Vybrat vše

oscam.dvbapi
P: 0D96 

Zkus upravit ´tu rchlost

Kód: Vybrat vše

mhz                           = 357
cardmhz                       = 357

Co to máš za box?

[callas]

skusil som zmenit dvbapi a aj rychlost, no aj tak nic :/ Mam zgemma star 2s

[Thomik1]

Skáčou ti tam EMM .

Clipboard02.jpg

Karta je funkční ? sepro a vše kolem...

[efendy55]

skús to takto ...

[reader]
label = Skylink
protocol = internal
device = /dev/sci0
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 0,1,3,2


povol zápisy userovi

au = 1


prečo všetci zadávate caid v readers ????? ja to nemám nikde frčím na ice a irdete a nemám s tým absolútne žiadny problém ....

[callas]

Karta je funkcna, ale nebola aktivovana cca. 1.5 roka. Btw, kartu mi to uz naslo, ale ked prepnem na nejaky kanal napr. STV 1/2, tak dostavam zas uz tieto logy:

Kód: Vybrat vše

2017/03/26 20:56:20 7F5C1CB2 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0D96 PROVID 000000 ECMPID 0475 ANY CHID PMTPID 044C VPID 0456
2017/03/26 20:56:21 7F5C1CB2 c      (ecm) dvbapi (0D96@000004/0000/1F41/80:B529E18343579DEAA81AF3E45B128A6A): not found (190 ms) by SKY_LINK
2017/03/26 20:56:21 7F5C1CB2 c   (dvbapi) Demuxer 0 found 3 ECMpids and 9 STREAMpids in PMT
2017/03/26 20:56:21 7F5C1CB2 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2017/03/26 20:56:21 7F5C1CB2 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0D96 PROVID 000004 ECMPID 0475 ANY CHID PMTPID 044C VPID 0456
2017/03/26 20:56:21 7F5C1CB2 c      (ecm) dvbapi (0D96@000004/0000/1F41/80:B529E18343579DEAA81AF3E45B128A6A): not found (5 ms) by SKY_LINK
2017/03/26 20:56:22 7F5C1CB2 c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 2 disabled ecmpids!
2017/03/26 20:56:22 7F5C1CB2 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0D96 PROVID 000004 ECMPID 0475 ANY CHID PMTPID 044C VPID 0456
2017/03/26 20:56:22 7F5C1CB2 c      (ecm) dvbapi (0D96@000004/0000/1F41/80:B529E18343579DEAA81AF3E45B128A6A): not found (4 ms) by SKY_LINK
2017/03/26 20:56:23 7F5C1CB2 c   (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2017/03/26 20:56:23 7F5C1CB2 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0D96 PROVID 000004 ECMPID 0475 ANY CHID PMTPID 044C VPID 0456
2017/03/26 20:56:23 7F5C1CB2 c      (ecm) dvbapi (0D96@000004/0000/1F41/80:B529E18343579DEAA81AF3E45B128A6A): not found (9 ms) by SKY_LINK
2017/03/26 20:56:24 7F5C1CB2 c   (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 2 disabled ecmpids!
2017/03/26 20:56:24 7F5C1CB2 c   (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 0D96 PROVID 000004 ECMPID 0475 ANY CHID PMTPID 044C VPID 0456
2017/03/26 20:56:24 7F5C1CB2 c      (ecm) dvbapi (0D96@000004/0000/1F41/80:B529E18343579DEAA81AF3E45B128A6A): not found (7 ms) by SKY_LINK

[efendy55]

no ak ti nešla tak dlho tak jedine asi skúsiť skylink ready bazmek ,alebo ju poslať do skylinku . hlavné je neprepínať programy , musí sama naštartovať a každých 15-min skúšať refresh karty cez ich web , alebo priamo kontaktovať skylink . iné ti asi nepomôže . ešte dobré skúsenosti mám s gboxom . pokial ti nepríde EMM tak ti karta nepôjde ........ pravdepodobne ju v oscame nenaštartuješ , nechaj ju celú noc za to nič nedáš ,ale pochybujem .....

[Thomik1]

U SKYLINK polozky musi svitit taky ACTIVE. jinak muzes cekat do vánoc.

[elektrikar]

nechybí ti tam náhodou vyplněný jeden řádek v readeru?

auprovid = 000004
tím by se snad i vysvětlilo, to restartování dekodování. :-)

[efendy55]

čím dlhšie je karta OFF tak potom tým horšie štartuje / vlastná skúsenosť / nedávno som aktivoval dve takéto karty jedna bola 11 a druhá takmer 12-mesiacov OFF a tá prvá naštartovala asi po 5-hod a druhej to trvalo takmer 20-hod a obe boli u predajcu v skylink ready bazmeku . a to nepíšem kolko ktrát som to skúšal doma v rôznych boxoch a nespočetné množstvo refresh cez web ........ ale napr s gboxom mám dobré skúsenosti na takéto štarty kariet ...... ešte ma napadlo píšeš že karta bola OFF 1 a1/2 roka .... nie je tam podmienka že ti ju naštartujú za nejaký poplatok ??? lebo jeden čas a to nie dávno bolo u skylinku problém naštartovať karty ktoré boli dlhšie ako rok OFF , potom to vraj umožnili ale za nejaký poplatok tuším že okolo 10 až 15 euro to bolo a musel si kontaktovať skylink a po overení údajov ti ju naštartovali . ale či to platí aj momentálne teraz neviem .... skús si to telefonicky overiť ,lebo môžeš čakať na zápisy aj 5 rokov ......

[callas]

efendy55: Reaktivovacny poplatok mam zaplateny aj spolu so serpo. Tak, ze netusim v com je chyba. Ked, ze som skusal uz hadam vsetko. No, nic dakujem vam vsetkym za ochotu idem kontaktovat skylink.

[efendy55]

skús ešte skylink ready a bombareduj skylink , oni ti povedia čo s tým . hlavne neprepínaj na to bacha .... nechaj to na jednom programe , musí to naštartovať samé . niekedy odporúčali na čT program prepnúť , ako to je momentálne kde to ide najlepšie neviem oni ti povedia . ešte aby si ju nemusel poslať do ostravi ....... lovu zdar , EMM zvlášť .....

[badi80]

u techto prijmacu funguje oscam prerfektne , muzes skusit treba i cccam 2.3.0
tam nemusis nic nastavovat

[badi80]

jeste toto vlozit do slozky etc , stava se ze se vypina emulator pri prepinani programu

[mjozef]

Na asuse WL-500gP ma pripojene tri skylink karty vsetko ide len mam problem s aktualizaciou jednej karty
prva karta bez problemov aj plustelka ale kartu co mam skylink cz mi prichadzaju iba G EMM , S / UQ ziadne
prikladam conf
[reader]
label = skylink_next1
description = skylink_next1
protocol = mouse
device = /dev/ttyUSB2
pincode = 0000
services = !czechregion
keepalive = 1
caid = 0D96
ecmwhitelist = 0D96:80;0D96@000004:80;0D96:80,B8
detect = none
mhz = 600
ident = 0D96:000004
group = 1

[reader]
label = skylink_ICE_cz
description = skylink_ICE_cz
protocol = mouse
device = /dev/ttyUSB0
pincode = 0000
caid = 0D96
ecmwhitelist = 0D96:80;0D96@000004:80;0D96:80,B8
detect = cd
mhz = 600
ident = 0D96:000004,000000
group = 1

[reader]
label = Plustelka
description = Plustelka
protocol = mouse
device = /dev/ttyUSB1
services = plustelka
keepalive = 1
caid = 0668
boxkey = B1B2B3B4B5B6B7B8
rsakey = AB722A8CAA9F58DE0D1CBB6FF329C961ED9DD759B103082D1BAE64C27A861D42E7F631891C2660EFA57484F80BBB4E0E8249A8368E31BD3FFC369FBE95160528
needsemmfirst = 1
detect = cd
mhz = 600
cardmhz = 600
group = 2

[account]
user = user
pwd = user
caid = 0D96,0668,0D96
uniq = 2
monlevel = 4
au = Plustelka,skylink_next1,skylink_ICE_cz
group = 1,2
preferlocalcards = 2
max_connections = 2

nema niekto nijaky napad
dik