pomoc s konfiguraciou oscam

[eth4rendil]

Dobrý deň,

mám HD-BOX FS-9105 PVR a chcel by som pomôcť s konfiguráciou oscamu. Mám Skylink ICE kartu a OSCAM. Pokúšam sa nakonfigurovať newcam server.
Skúšam rôzne konfigurácie podľa návodov a oscam mi nevie stále nájsť kartu:

Kód: Vybrat vše

2011/12/06 22:14:11 29EC14E8 h HTTP Server listening on port 8888 
2011/12/06 22:14:11 298A7208 s http thread started 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/sci0 
2011/12/06 22:14:11 2A0C14E8 r reader thread started (thread=2A0C14E8, label=skylink_numero_uno, device=/dev/sci0, detect=cd, mhz=500, cardmhz=357) 
2011/12/06 22:14:11 2A0C14E8 r ERROR opening device /dev/sci0 
2011/12/06 22:14:11 2A0C14E8 r Cannot open device: /dev/sci0 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/sci1 
2011/12/06 22:14:11 2A2C14E8 r reader thread started (thread=2A2C14E8, label=skylink_numero_duo, device=/dev/sci1, detect=cd, mhz=500, cardmhz=357) 
2011/12/06 22:14:11 2A2C14E8 r ERROR opening device /dev/sci1 
2011/12/06 22:14:11 2A2C14E8 r Cannot open device: /dev/sci1 
2011/12/06 22:14:11 298A7208 s creating thread for device SC1 
2011/12/06 22:14:11 2A4C14E8 r reader thread started (thread=2A4C14E8, label=blby_test, device=SC1, detect=cd, mhz=357, cardmhz=357) 
2011/12/06 22:14:11 2A4C14E8 r ERROR opening device SC1 
2011/12/06 22:14:11 2A4C14E8 r Cannot open device: SC1 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/tts/0 
2011/12/06 22:14:11 2A6C14E8 r reader thread started (thread=2A6C14E8, label=blby_test2, device=/dev/tts/0, detect=cd, mhz=500, cardmhz=357) 
2011/12/06 22:14:11 2A6C14E8 r ERROR opening device /dev/tts/0 
2011/12/06 22:14:11 2A6C14E8 r Cannot open device: /dev/tts/0 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/tts/1 
2011/12/06 22:14:11 2A8C14E8 r reader thread started (thread=2A8C14E8, label=omg, device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357) 
2011/12/06 22:14:11 2A8C14E8 r ERROR opening device /dev/tts/1 
2011/12/06 22:14:11 2A8C14E8 r Cannot open device: /dev/tts/1 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/tts/0 
2011/12/06 22:14:11 2AAC14E8 r reader thread started (thread=2AAC14E8, label=serem_to, device=/dev/tts/0, detect=cd, mhz=357, cardmhz=357) 
2011/12/06 22:14:11 2AAC14E8 r ERROR opening device /dev/tts/0 
2011/12/06 22:14:11 2AAC14E8 r Cannot open device: /dev/tts/0 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/tts/1 
2011/12/06 22:14:11 2ACC14E8 r reader thread started (thread=2ACC14E8, label=dalsie_nefunkcne, device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357) 
2011/12/06 22:14:11 2ACC14E8 r ERROR opening device /dev/tts/1 
2011/12/06 22:14:11 2ACC14E8 r Cannot open device: /dev/tts/1 
2011/12/06 22:14:11 298A7208 s creating thread for device /dev/tts/0 
2011/12/06 22:14:11 2AEC14E8 r reader thread started (thread=2AEC14E8, label=serem_to_no_irdeto, device=/dev/tts/0, detect=cd, mhz=357, cardmhz=357) 
2011/12/06 22:14:11 2AEC14E8 r ERROR opening device /dev/tts/0 
2011/12/06 22:14:11 2AEC14E8 r Cannot open device: /dev/tts/0 
2011/12/06 22:14:11 298A7208 s loadbalancer: can't read from file /tmp/.oscam/stat 
2011/12/06 22:14:11 298A7208 s waiting for local card init 
2011/12/06 22:14:13 298A7208 s init for all local cards done 
2011/12/06 22:14:13 298A7208 s anti cascading disabled 
2011/12/06 22:14:13 2B0C14E8 c plain dvbapi-client granted (dummy, au=auto (8 reader)) 
2011/12/06 22:14:13 2B0C14E8 c stapi: 13 entries read from oscam.dvbapi 
2011/12/06 22:14:13 2B0C14E8 c stapi: use default ioctls 
2011/12/06 22:14:13 2B0C14E8 c stapi: PTI: SWTS0 skipped 
2011/12/06 22:14:13 2B0C14E8 c stapi: PTI: PTI1 open 0 
2011/12/06 22:14:13 2B0C14E8 c stapi: PTI: PTI open 1 
2011/12/06 22:14:13 2B0C14E8 c stapi: liboscam_stapi v.0.08a initialized 

tu je môj oscam.server (resp. pokusy o správnu konfiguráciu)

Kód: Vybrat vše

[reader]
label                         = skylink_numero_uno
protocol                      = internal
device                        = /dev/sci0
pincode                       = 0000
services                      = skylink_ice
caid                          = 0D03,0D02,0D96,0D0F,0D70
force_irdeto                  = 1
detect                        = cd
mhz                           = 500
cardmhz                       = 357
group                         = 1
emmcache                      = 1,3,2


[reader]
label                         = skylink_numero_duo
description                   = skylink citacka
protocol                      = internal
device                        = /dev/sci1
caid                          = 0D96
detect                        = cd
mhz                           = 500
cardmhz                       = 357
group                         = 1
emmcache                      = 1,3,2


[reader]
label                         = blby_test
protocol                      = internal
device                        = SC1
caid                          = 0D96
force_irdeto                  = 1
detect                        = cd
mhz                           = 357
cardmhz                       = 357
group                         = 1


[reader]
label                         = blby_test2
protocol                      = internal
device                        = /dev/tts/0
caid                          = 0D96
force_irdeto                  = 1
detect                        = cd
mhz                           = 500
cardmhz                       = 357
group                         = 1,2,3
emmcache                      = 1,2,2


[reader]
label                         = omg
protocol                      = internal
device                        = /dev/tts/1
caid                          = 0D96
force_irdeto                  = 1
detect                        = cd
mhz                           = 357
cardmhz                       = 357


[reader]
label                         = serem_to
protocol                      = internal
device                        = /dev/tts/0
caid                          = 0D96
force_irdeto                  = 1
detect                        = cd
mhz                           = 357
cardmhz                       = 357


[reader]
label                         = dalsie_nefunkcne
protocol                      = internal
device                        = /dev/tts/1
caid                          = 0D96
detect                        = cd
mhz                           = 357
cardmhz                       = 357


[reader]
label                         = serem_to_no_irdeto
protocol                      = internal
device                        = /dev/tts/0
caid                          = 0D96
detect                        = cd
mhz                           = 357
cardmhz                       = 357

Dakujem za každý nápad

[grantec]

aha - mlady pan z abfora. Neviem, preco to vsade pises . Tu si spravne, len si pouzil nespravne subory - tie mas z ineho boxu, nie z hdboxu .

Kód: Vybrat vše

[reader]
label                         = skylink
protocol                      = stapi
device                        = SC0
detect                        = cd
mhz                           = 500
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,2

takto pojde karta hned
v oscam.dvbapi musis mat:

Kód: Vybrat vše

S: PTI pmt1_1.tmp
S: PTI pmt1_2.tmp
S: PTI pmt1_3.tmp
S: PTI pmt1_4.tmp
S: PTI1 pmt2_1.tmp
S: PTI1 pmt2_2.tmp
S: PTI1 pmt2_3.tmp
S: PTI1 pmt2_4.tmp

takto mozno bude aj dekodovat .

[eth4rendil]

Nemam v tomto zatial moc skillov tak som sa skusil spytat pre istotu na dvoch forach :)

mno nahodil som nove configy ale stale obligatna hlaska
cannot open device. Nemoze to byt sposobene tym ze tam bezi Mcas?

Kód: Vybrat vše

2011/12/06 23:09:51 298A7208 s >> OSCam << cardserver started, version skyway-lmodv5, build #5932 (sh4-linux-stapi) 
2011/12/06 23:09:51 298A7208 s version=skyway-lmodv5, build #5932, system=sh4-linux-stapi, nice=-1 
2011/12/06 23:09:51 298A7208 s client max. idle=120 sec, debug level=0 
2011/12/06 23:09:51 298A7208 s max. logsize=unlimited, loghistorysize=4096 bytes 
2011/12/06 23:09:51 298A7208 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms 
2011/12/06 23:09:51 298A7208 s services reloaded: 0 services freed, 30 services loaded, rejected 0 
2011/12/06 23:09:51 298A7208 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled 
2011/12/06 23:09:51 298A7208 s signal handling initialized (type=sysv) 
2011/12/06 23:09:51 298A7208 s 631 service-id's loaded in 10ms 
2011/12/06 23:09:51 298A7208 s can't open file "/var/keys/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded 
2011/12/06 23:09:51 298A7208 s 881 provid's loaded 
2011/12/06 23:09:51 298A7208 s can't open file "/var/keys/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded 
2011/12/06 23:09:51 298A7208 s monitor: disabled 
2011/12/06 23:09:51 298A7208 s camd33: disabled 
2011/12/06 23:09:51 298A7208 s camd35: disabled 
2011/12/06 23:09:51 298A7208 s cs378x: disabled 
2011/12/06 23:09:51 298A7208 s newcamd: initialized (fd=41, port=15006, ip=192.168.1.40, crypted) 
2011/12/06 23:09:51 298A7208 s CAID: 0D96 
2011/12/06 23:09:51 298A7208 s provid #0: 000004 
2011/12/06 23:09:51 298A7208 s newcamd: initialized (fd=42, port=15004, ip=192.168.1.40, crypted) 
2011/12/06 23:09:51 298A7208 s CAID: 0D0F 
2011/12/06 23:09:51 298A7208 s provid #0: 000004 
2011/12/06 23:09:51 298A7208 s provid #1: 000008 
2011/12/06 23:09:51 298A7208 s radegast: disabled 
2011/12/06 23:09:51 29CC14E8 h HTTP Server listening on port 8888 
2011/12/06 23:09:51 298A7208 s http thread started 
2011/12/06 23:09:51 298A7208 s creating thread for device SC0 
2011/12/06 23:09:51 29EC14E8 r reader thread started (thread=29EC14E8, label=skylink_ice, device=SC0, detect=cd, mhz=357, cardmhz=357) 
2011/12/06 23:09:51 29EC14E8 r stapi: STSMART-IFD: STSMART_Open 5 
2011/12/06 23:09:51 29EC14E8 r Cannot open device: SC0 
2011/12/06 23:09:51 298A7208 s creating thread for device SC0 
2011/12/06 23:09:51 2A0C14E8 r reader thread started (thread=2A0C14E8, label=skylink, device=SC0, detect=cd, mhz=500, cardmhz=357) 
2011/12/06 23:09:51 2A0C14E8 r stapi: STSMART-IFD: STSMART_Open 5 
2011/12/06 23:09:51 2A0C14E8 r Cannot open device: SC0 
2011/12/06 23:09:51 298A7208 s loadbalancer: can't read from file /tmp/.oscam/stat 
2011/12/06 23:09:51 298A7208 s waiting for local card init 
2011/12/06 23:09:52 298A7208 s init for all local cards done 
2011/12/06 23:09:52 298A7208 s anti cascading disabled 
2011/12/06 23:09:52 2A4C24E8 c plain dvbapi-client granted (hdbox, au=on (1 reader)) 
2011/12/06 23:09:52 2A4C24E8 c stapi: 13 entries read from oscam.dvbapi 
2011/12/06 23:09:52 2A4C24E8 c stapi: use default ioctls 
2011/12/06 23:09:52 2A4C24E8 c stapi: PTI: SWTS0 skipped 
2011/12/06 23:09:52 2A4C24E8 c stapi: PTI: PTI1 open 0 
2011/12/06 23:09:52 2A4C24E8 c stapi: PTI: PTI open 1 
2011/12/06 23:09:52 2A4C24E8 c stapi: liboscam_stapi v.0.08a initialized 

[grantec]

jasne ,
klikni na spusteny Mcas OK a prejdi dole na configuration.
v polozke readers zakaz obe citacky.
potom restartni box a citacky pouzije Oscam .

[eth4rendil]

ooomg konecne to funguje :)
dakujem ti veeeelmi pekne za tvoju ochotu a rady :)